Averra ChemicalsProduct enquiry

PRODUCT / NOVOL

NOVOPUR 1010

Two-component matt polyurethane topcoat for transport vehicles, machinery, equipment and steel structures.

← Back to industrial coatings

BUILT FOR THE JOB

A low-gloss finish for working vehicles and equipment

NOVOPUR 1010 is a two-component matt polyurethane topcoat for transport vehicles, machinery, steel structures and external tank surfaces. It combines a low-gloss appearance with weather, chemical and mechanical resistance, making it a useful finishing layer when appearance and protection both matter.

The coating is applied over correctly prepared acrylic, polyurethane or epoxy primers, existing paintwork or polyester laminates. Its hiding power and flow help create an even finish, while the specified standard and fast hardener options let the applicator select the curing schedule for the job.

Before you specify: Use HARD 10 and THIN 50 in the TDS proportions. This is a topcoat over the specified prepared substrates; do not assume direct-to-bare-metal suitability.

NOVOL NOVOPUR 1010 manufacturer packaging image
Manufacturer image · NOVOPUR 1010

Original manufacturer packaging image. Listed sizes below are confirmed manufacturer options; a separate image for every size is not available. Packaging artwork can change. Images are not a guarantee of current stock.

Packaging & supply

  • 7.5 kg · Effect: matte

Base, hardener and thinner are separate products unless a complete kit is explicitly identified. Images are not a dimensional scale comparison.

Enquire about NOVOPUR 1010

SPECIFY THE COMPLETE SYSTEM

Hardener & mixing selection

Choose by TDS curing schedule and application method.

HARD 10 - INDUSTRIAL manufacturer packaging image
Official NOVOL image: HARD 10 STANDARD shown. Separate FAST packaging image is not yet available.

HARD 10 STANDARD

Base : hardener by volume
6:1
Base : hardener by weight
100:16
Thinner
15–20% THIN 50

HARD 10 FAST

Base : hardener by volume
6:1
Base : hardener by weight
100:16
Thinner
15–20% THIN 50

Ratios refer to the named base and hardener. Volume and weight proportions are different measurements. Thinner percentages and additions must follow the basis in the linked TDS; do not treat them as an interchangeable mixing ratio.

Pot life at 20°C
STANDARD 5 h; FAST 2 h
Dry film per coat
20–30 µm
Application climate
Coating, substrate and ambient +10 to +35°C; relative humidity ≤80%; dry substrate ≥3°C above dew point.
Air-assisted airless restriction
Use HARD 10 STANDARD and THIN 50 STANDARD only.

Air-assisted airless application requires HARD 10 STANDARD and THIN 50 STANDARD.

MANUFACTURER DOCUMENTATION

Technical & safety data

AVERRA-branded technical data sheets retain the source technical data and issue dates. Safety data sheets remain the original manufacturer editions. Document language and regulatory jurisdiction are stated in each file. European SDS do not establish Canadian WHMIS compliance. Confirm the applicable local SDS and current revision before use.

Manufacturer: NOVOL. Averra supplies materials and helps clarify application requirements. Product listings do not establish military qualification, project approval or current stock. Use the exact approved system and its technical instructions.

Let’s talk about your project.Start a product enquiry