Product enquiryPRODUCT / NOVOL
Two-component semi-matt polyurethane topcoat for vehicles, agricultural machinery and steel structures.
BUILT FOR THE JOB
NOVOPUR 1050 is a two-component polyurethane topcoat that gives vehicles, machinery, steel structures and external tank surfaces a semi-matt appearance. It is a useful choice where the specified finish calls for a moderate sheen together with resistance to weather, scratching and mechanical wear.
Its hiding power and flow support an even decorative finish over correctly prepared acrylic, polyurethane or epoxy primers, existing coatings or polyester laminates. The system uses HARD 10 hardener and THIN 50 thinner, with standard and fast hardener options described in the technical data sheet.
Before you specify: Follow the substrate preparation and hardener-specific application instructions. Air-assisted airless spraying is specified only with HARD 10 STANDARD and THIN 50 STANDARD.
Original manufacturer packaging image. Listed sizes below are confirmed manufacturer options; a separate image for every size is not available. Packaging artwork can change. Images are not a guarantee of current stock.
Base, hardener and thinner are separate products unless a complete kit is explicitly identified. Images are not a dimensional scale comparison.
Enquire about NOVOPUR 1050SPECIFY THE COMPLETE SYSTEM
Choose by TDS curing schedule and application method.
Ratios refer to the named base and hardener. Volume and weight proportions are different measurements. Thinner percentages and additions must follow the basis in the linked TDS; do not treat them as an interchangeable mixing ratio.
Air-assisted airless application requires HARD 10 STANDARD and THIN 50 STANDARD.
MANUFACTURER DOCUMENTATION
AVERRA-branded technical data sheets retain the source technical data and issue dates. Safety data sheets remain the original manufacturer editions. Document language and regulatory jurisdiction are stated in each file. European SDS do not establish Canadian WHMIS compliance. Confirm the applicable local SDS and current revision before use.
Manufacturer: NOVOL. Averra supplies materials and helps clarify application requirements. Product listings do not establish military qualification, project approval or current stock. Use the exact approved system and its technical instructions.